Data Application Overview; Pre-Configured Data In The Data Application - Raymarine C140w User Reference Handbook

14.1 Data application overview

The data application displays system and instrument data on your
multifunction display.
The data application enables you to view numeric data generated
by the system. It also shows data from instruments connected to
your multifunction display using the NMEA or SeaTalk protocols.
176
14.2 Pre-configured data in the data
application
By default, the data application displays a pre-configured range of
system and instrument data in a number of data 'panels'. Each
panel consists of a number of 'cells', each containing a different
item of data.
Note: Panel selection is a local setting, and therefore only affects
the individual display that you are currently using. It does not
affect any networked displays.
List of pre-configured data panels
A range of pre-configured panels show commonly used data.
The following table shows the data displayed by each type of panel.
Each data item listed in the table below represents a 'cell'.
Note: Panel selection is a local setting, and therefore only affects
the individual display that you are currently using. It does not
affect any networked displays.
In the following table, Y=YES, N=NO.
Naviga-
Data tion panel
Vessel Y
Position
Active Y
Waypoint
TTG Y
Way- Fish-
point Route ing
panel panel panel
Y Y Y
Y Y Y
N N N
C-Series Widescreen user reference
Sail-
ing
panel
N
N
N