Eliwell EWCFW-08 User Manual page 25

CHAPTER 2 - GENERAL INFORMATION
For the effect of this code, the standard product is conceived
as follows:
- CFW-08 with standard control board.
- Degree of protection: Nema 1 for the models 22 A,
28 A and 33 A/ 200-400 V and also 13 A,16 A, 24 A
and 30 A/380-480 V, IP20 for the other models.
CFW-08 Plus - A1 is composed of the inverter and the
control board 1. Example: CFW080040S2024POA1Z.
CFW-08 Plus - A2 is composed of the inverter and the
control board 2. Example: CFW080040S2024POA2Z.
These models are factory set for bipolar analog inputs (-10 V
to +10 V).
This configuration is lost when the factory default parameters
are loaded (P204 = 5). Refer to the detailed description of
parameters P204 and P235 for further information.
CFW-08 Plus - A3 is composed of the inverter, the KFB-
CO-CFW08 kit and the CANopen communication protocol.
Example: CFW-080040S2024POA3Z.
CFW-08 Plus - A4 is composed of the inverter, the KFB-
DN-CFW08 kit and the DeviceNet communication protocol.
Example: CFW080040S2024POA4Z.
CFW-08 Multipump - A5 is composed of the inverter and
the control board 5, used for multipump system applications.
7.0 A, 16.0 A, 22 A, 28 A and 33 A /200-240 V and for all
380-480 V models are just available with three-phase
power supply.
A Category C2 RFI filter (optional) can be installed inside
the inverter in models 7.3 A and 10 A/200-240 V (single-
phase) and 2.7 A, 4.3 A, 6.5 A, 10 A, 13 A, 16 A, 24 A and
30 A/380-480 V. Models 1.6 A, 2.6 A and 4.0 A/200-240 V
(single-phase) and 1.0 A, 1.6 A, 2.6 A and 4.0 A/380-480 V
can be provided mounted on a footprint Category C2 RFI
filter (optional).
The listing of the existing models (voltage/current) is shown
in item 7.1.
25