Eliwell EWCFW-08 User Manual page 15

II. Fault Messages
III. Other Messages
CFW-08 - QUICK PARAMETER REFERENCE
Display
E00 Output overcurrent/short-circuit/output ground fault
E01 DC link overvoltage
E02 DC link undervoltage
Overtemperature at the power heatsink or in the
E04
inverter internal air
E05 Output overload (Ixt function)
E06 External fault
E08 CPU error (Watchdog)
E09 Program memory error (Checksum)
E10 Keypad copy function error
E14 Self-tuning routine (estimation of the motor
parameters) error
E22, E25,
Serial communication error
E26 and E27
E24 Programming error
E28 Serial interface Watchdog timeout error
E31 Keypad connection fault (HMI-CFW08-RS)
E32 Motor overtemperature (external PTC)
E41 Self-diagnosis fault
Display
rdy Inverter is ready to be enabled
Power supply voltage is too low for the inverter
Sub
operation (undervoltage)
dcbr Inverter in DC braking mode
auto Inverter is running self-tuning routine
Keypad copy function in progress (only available in
copy
the HMI-CFW08-RS) - inverter to keypad
Keypad copy function in progress (only available in
past
the HMI-CFW08-RS) - keypad to inverter
Srdy Inverter in the sleep rdy mode
Description
Description
Page
15