Schematic Display Of Unity 2 Status; Controlling Method; Unity 2 Options - Markes International Unity 2 User Manual

3.3.3 Schematic display of UNITY 2 status

Schematic display of UNITY 2 status
A simple schematic illustrating the status of UNITY 2 can be displayed on the screen at all times during A simple schematic illustrating the status of UNITY 2
system operation.
This is accessed using the status icon ( This is accessed using the status icon (
The schematic display of UNITY 2 status is linked directly to operation of the instrument. The di The schematic display of UNITY 2 status is linked directly to operation of the instrument. The display is The schematic display of UNITY 2 status is linked directly to operation of the instrument. The di
thus not just cosmetic, but is a representation of the actual status of the instrument. thus not just cosmetic, but is a representation of the actual status of the instrument.

3.3.4 Controlling method

One method is identified by UNITY 2 as that controlling the system i.e. the method dictating the set One method is identified by UNITY 2 as that controlling the system i.e. the method dictating the set One method is identified by UNITY 2 as that controlling the system i.e. the method dictating the set
parameters. This method is called the C parameters. This method is called the Controlling Method and cannot be deleted or closed until another
method is loaded as the controlling method. method is loaded as the controlling method.
To load another method use either the Load icon or select File and then Load from the menu. The loaded To load another method use either the Load icon or select File and then Load from the menu. The loaded To load another method use either the Load icon or select File and then Load from the menu. The loaded
method will not automatically become the controlling method. The controlling method is always identified method will not automatically become the co
as such in the bar at the top of its window, whether active or not. as such in the bar at the top of its window, whether active or not.
To make a loaded method the controlling method, select it (to make it the active method) then click the To make a loaded method the controlling method, select it (to make it the active method) then click the To make a loaded method the controlling method, select it (to make it the active method) then click the
icon. Once set UNITY 2 immediately starts to set the new parameters. The instrument status TY 2 immediately starts to set the new parameters. The instrument status TY 2 immediately starts to set the new parameters. The instrument status
changes accordingly. Only one method is identified as the controlling method at any one time. changes accordingly. Only one method is identified as the controlling method at any one time. changes accordingly. Only one method is identified as the controlling method at any one time.
NOTE: An active method is not necessarily the controlling method. The active method An active method is not necessarily the controlling method. The active method is simply that last An active method is not necessarily the controlling method. The active method
modified or accessed by the operator. modified or accessed by the operator.
3.4

UNITY 2 Options

The Options page is accessed in the UNITY 2 software via 'View > Options' The Options page is accessed in the UNITY 2 software via 'View > Options'
Markes International Ltd
T: +44 (0)1443 230935 F: +44 (0)1443 231531 E: enquiries@markes.com
www.markes.com
can be displayed on the screen at all times during
) or by selecting View and then Status Show. ) or by selecting View and then Status Show.
ontrolling Method and cannot be deleted or closed until another
ntrolling method. The controlling method is always identified
enquiries@markes.com
QUI-1057
Page 30