Reporting - Markes International Unity 2 User Manual

QUI-1057
Page 35

3.4.5 Reporting

This option influences the information recorded in the 'sequence reporter' page of method linking, see
Section 3.3.1. Recording parameters are selected by clicking on the appropriate box(es).
NOTE: the reporting options available will change if an accessory is being used in conjunction with UNITY
2.
Method Name
Displays the name of the method used.
Desorb Start Time
Displays the time at which tube desorption started.
Desorb End Time
Displays the time at which tube desorption was completed.
Peak Desorb Temp
Displays the maximum temperature the tube oven reached during the analysis.
Trap Fire Time
Displays the time at which the cold trap desorption started (and therefore the time at which a GC
connected to the UNITY would have been triggered to start).
Unity Deviation
Displays any error messages encountered during operation (e.g. Tube Leaked)
Injection Count
Displays the number of times a given sample has been analysed.
Markes International Ltd
T: +44 (0)1443 230935 F: +44 (0)1443 231531 E: enquiries@markes.com
www.markes.com