Reader - Omron V750-BA50C04-US User Manual

SECTION 2
Specifications and Performance

Reader

Names and Functions of Components
Control port
Name
Antenna port
[ANT1-ANT4]
Control port
[CTRL PORT]
DC Power input
[POWER DC12V]
RS-232C port
[RS-232C]
Ethernet port
[ETHERNET]
Input/Output port
[IN 1,2,3,4,C]
[OUT 1,2,3,4,C]
Mode switch
(Not indicated)
Status Indicators
Note: The high-speed mode cannot be used by the controller's setting.
 Antennas other than V740-HS01CA/HS01LA cannot be connected.
 The antenna cable must use an optional special antenna cable.
 The AC adapter must use the AC adapter of the attachment.
 The external I/O connector must use the terminal stand plug of the attachment.
UHF RFID System
20
User's Manual
Antenna port
Connects with UHF mono-static type antenna specified by OMRON via
antenna cables.Max 4 antennas can be connected to.
For future expansion.
Connects with the attachment AC adapter to receive +12V electric power.*
Extension of AC adapter cable is not allowable.
Connects with the host via a commercially available RS-232C cable for DOS/V
PC.
Connects with the host via a commercially available 10/100Base-T cable.
Connects to the input/output signal cable(s) via an attached I/O port adapter
(MC 1,5/10-STF-3,81).4 Inputs: connects with the sensor that works as a
trigger signal for communication start.4 Outputs: connects with the light or
actuator that is driven by output signal.
Pushing this button for 1 second or more makes the system rebooting with
default setting, which will be functional in case of system error or setting
unknown.
PWR:
RUN:
ERR:
NORM/ERC:
ANTENNA:
IN:
OUT:
DC Power input
RS-232C port
Function
Status Indicators
Mode switch
Ethernet port
Input/Output port
Connector specifications
Reverse TNC
Exclusive connector
Exclusive connector
D-sub 9pin (male)
Inch screw (#4-40)
RJ-45
LED Left: Link, Right: Act
MC 1,5/10-GF-3.81
(produced by PHOENIX
CONTACT).
---
----