Control Command - Omron V750-BA50C04-US User Manual

Control Command

Initialize setting (INIT)
This command initializes all setting of reader to the factory default setting. All settings shall be written
into the inner nonvolatile memories. After executing this INIT command, the reader requires reboot.
 Command Format
Command code
I N I T
4
 Response Format
Command code Response code
I N I T
4
Item
Response code
 Command/Response Example
Initialize setting (INIT)
Command
Response
Example 1) All setting of reader is initialized to the factory default setting:
[Tx] INIT<LF>
[Rx] INIT0000<LF>
4
0000: Normal end
For other Response codes, refer to Response Code List.
p. 71
INIT<LF>
INIT[RC]<LF>
[RC]: Response Code
Command Line Interface
Description
UHF RFID System
SECTION 5
119
User's Manual