Siemens sitrans LR 400 Instruction Manual page 68

Parameter, menu
identification
or
4.4.1.5: Volume
param.
4.4.2: Language local = [1.1]
4.4.3: LCD backlight
4.5: Device info
4.5.1: Power supply
4.5.2: Process
temperature
4.5.4: Electrical con-
nection
4.5.5:
Antenna&flange
4.5.5.1: Flange size
4.5.5.2: Flange type
4.5.5.3: Pressure
range
4.5.5.4: Antenna type
4.5.5.6: Flange
material
4.5.5.7: Seal material Sealing material
4.5.6: Tag
Page 64
Parameters (Profibus-PA)
Description
= [4.2.5]
Background illumination
of the LCD
Voltage range of the built-
in power supply unit
Temperature range of the
flange in °C
Rated width of the flange according to
Type of flange
Pressure range of the
process connection
Device identification
SITRANS LR 400 – INSTRUCTION MANUAL
Factory Setting
Setting Possibilities
off on
off
according to non-editable
customer
specifications
according to non-editable
customer
specifications
according to non-editable
customer
specifications
DN 80, 3 in
customer DN 100, 4 in
specifications DN 150, 6 in
Special design
according to DIN
customer ANSI
specifications JIS
Special design
according to non-editable
customer
specifications
according to Horn type long
customer Horn type short
specifications Special design
according to 316/316L
customer Special design
specifications
according to Teflon
customer Kalrez
specifications Viton
Special design
according to up to any eight
customer characters
specifications
7ML19985FH03