Siemens sitrans LR 400 Instruction Manual page 6

WARNINGS:
• Installation shall only be performed by qualified personnel and in
accordance with local governing regulations.
• The SITRANS LR 400 is to be used only in the manner outlined in this
manual, otherwise protection provided by equipment may be impaired.
Qualified personnel
Qualified personnel are familiar with the installation, commissioning, and operation of
this equipment. In addition the person must be:
• trained and authorized to operate and service equipment/systems in accordance
with established safety procedures relating to electrical circuits, high pressures and
aggressive media.
• trained in the proper care and use of protective equipment in accordance with
established safety practices.
• trained in rendering first aid.
IMPORTANT: The information in Appendix IV of this manual is not
applicable to the flanges marked with serial numbers from 020102-001 to
020102-128. These flanges are intended for non-pressure applications in
North America only.
Page 2 SITRANS LR 400 –INSTRUCTION MANUAL 7ML19985FH03