Siemens sitrans LR 400 Instruction Manual page 52

4.2.5.8.1: Tank Design (F = Vertical Cylinder)
Value
Enter the external form of your vessel. You can choose from:
• Linear (any form with vertical walls and a flat floor)
• Vertical cylinder (vertically standing cylindrical form with curved covers)
• Horizontal cylinder (horizontal cylindrical form with curved caps)
• Sphere
4.2.5.8.2: Bottom Design (F = Dished end)
Value
Enter the form of the two vessel cover caps. You can choose from:
• Dished (according to DIN 28011)
• Basket (according to DIN 28013)
• Bullet (hemispherical shaped floor)
4.2.5.8.3: Tank volume (F = 20 m
Value
4.3: Analog Output
4.3.1: Error Level (F = D: Error Signal)
Level for the error signal to alarm in Analog or Digital output
Value
When D is selected, all errors are displayed. When D+F is selected, there is special
handling for failsafe. When D+F+W is selected, there is special handling for warnings.
Page 48
Linear
Vertical cylinder
Horizontal cylinder
Sphere
Dished end
Basket end
Bullet bottom
numerical value
D: Error Signal
D+F: Error Signal
D+F+W: Error Signal
SITRANS LR 400 – INSTRUCTION MANUAL
3 )
7ML19985FH03