Telephone settings
Handset and telephone base settings
Set date and time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information.
1.
Press
MENU
2.
Press
CID
or DIR on the handset, or press CID or DIR on the
telephone base to highlight Set date/time, then press
3.
Press
CID
or DIR on the handset, or press CID or DIR on the
telephone base to select the month, then press
number (01-12) using the dialing keys (0-9).
4.
Press
CID
or DIR on the handset, or press CID or DIR on the
telephone base to select the day, then press
number (01-31) using the dialing keys (0-9).
5.
Press
CID
or DIR on the handset, or press CID or DIR on the
telephone base to select the year, then press SET, or enter the 2-digit
number (00-99) using the dialing keys (0-9), then press
6.
Press
CID
or DIR on the handset, or press CID or DIR on the
telephone base to select the hour, then press
number (01-12) using the dialing keys (0-9).
7.
Press
CID
or DIR on the handset, or press CID or DIR on the
telephone base to select the minute, then press
number (00-59) using the dialing keys (0-9).
8.
Press
CID
or DIR on the handset, or press CID or DIR on the
telephone base to highlight AM or PM, or press 2 for AM or 7 for PM. Press
SET
to save. You hear a confirmation tone.
NOTE:
If the date and time are not set when a message is recorded, the system announces,
"Time and day not set," before each message plays.
in idle mode to enter the main menu.
SET
SET
. , or enter the 2-digit
SET
. , or enter the 2-digit
SET
22
SELECT
.
. , or enter the 2-digit
SET
.
. , or enter the 2-digit