Call Waiting On The Home Line - AT&T TL96273 User Manual

Telephone operation
Make, answer and end a call
Using a Bluetooth headset:
You can use a Bluetooth headset for home calls. However, you need to keep
the device within 15 feet of the telephone base for optimal performance.
Please see the user's manual of your Bluetooth headset for more information.
To answer a home call using a Bluetooth headset:
• Press CELL 2
To end a home call:
• Press CELL
To transfer a call from the telephone base to a Bluetooth headset:
• Press CELL 2, then press
headset. The telephone base displays Transferring audio to Headset A.
To transfer a call from the Bluetooth headset back to the telephone base:
• Press HOME.
NOTES:
• If you are on a call using a Bluetooth headset, and you lose the Bluetooth connection
or the battery becomes depleted, the call is lost.
• When you try to use a Bluetooth headset that is not connected to the base, the
telephone base displays Headset not connected! Press
headset to the telephone system. Refer to Bluetooth connection from idle mode on
page 17 and Connect/disconnect an active device on page 18.
• While using the cell line, you cannot use the Bluetooth headset.

Call waiting on the home line

If you subscribe to call waiting service from your telephone service provider,
you hear a tone if someone calls while you are already on a call.
• Press
HOME
base to put your current call on hold and take the new call.
• Press the same key at any time to switch back and forth between calls.
on the telephone base or
2, or the call key on your headset.
SELECT
/FLASH on the handset, or press FLASH on the telephone
the call key on your headset.
or CELL 2 again
CONNECT
33
to choose the
to connect your