Getting started
Installation options
Wall mount to tabletop installation
To change the telephone base from the wall mount position to tabletop
position, follow the steps below.
1.
If the telephone line cord and power adapter cord are bundled, untie
them first.
2.
Push the telephone base up to remove it from wall. Unplug the telephone
line cord (or DSL filter) from the wall. Unplug the power adapter from the
power outlet.
3.
Gently pull upward to release the wall mount bracket.
bracket up to tabletop position and push it into the telephone base until it
clicks into place.
4.
See Telephone base installation on page 7.
10
Rotate the wall mount