Adjusting The Temperature In Auto Mode - Honeywell T6 Pro Z-Wave User Manual

Adjusting the temperature in Auto mode

Auto mode (when the thermostat automatically chooses heating or cooling to
reach your desired temperature) is disabled by default. If your heating or cooling
professional enabled it, you'll see Auto appear as an option under Mode on the
thermostat home screen.
To choose your preferred temperatures for both heating and cooling in Auto mode,
follow the steps below.
1 Touch Mode on the thermostat home screen
until Auto appears. Then touch
choose your preferred temperature for the
mode that's currently active (heating or
cooling).
2 Next, touch the text area where the active
mode is displayed to switch to the inactive
mode.
3 Touch or
temperature in the other mode. After
5 seconds of inactivity, your setting will take
effect, and the thermostat screen will show
the set point of the active mode.
to choose your preferred
Following Schedule
or to
Mode
Following Schedule
Mode
6
AM
Auto Chg. On Following Schedule
Mode Fan
Heat Auto
Away Home Sleep
Menu Fan Mode
Heat On AM
Auto Chg. On Following Schedule
Mode Fan
Heat Auto
Away Home Sleep
Menu Fan
Mode
Heat On AM
Auto Chg. On
Mode Fan
Heat Auto
Away Home Sleep
Menu Fan
Heat On AM
Mode Fan
Heat Auto
Away Home Sleep
Menu Fan