Reset Schedule; Screen Lock Settings - Honeywell T6 Pro Z-Wave User Manual

Reset schedule

To reset your schedule back to the default
temperature setpoints (see page 12), follow
steps below.
1 Touch Menu on the thermostat screen.
2 Touch the
RESET, then touch Select.
3 Touch the
SCHEDULE, then touch Select.
4 Touch Yes to confirm.

Screen lock settings

To prevent unauthorized access to the thermostat, or to limit changes to the system
settings, there are two screen lock settings you can apply.
• Partial lock: Only the temperature can be changed.
• Full lock: No access is allowed without a PIN number.
Applying a screen lock setting
Touch Menu on the thermostat home screen.
1
2 Touch the
SCREEN LOCK, then touch Select.
3 Touch the
desired screen lock setting, then touch Select.
4 A PIN number will appear on screen. Write it
down and keep it in a safe place.
5 Touch Select, and confirm your screen lock
setting by touching Yes.
A partially or fully locked screen will be indicated
by a lock symbol at the bottom of the thermostat
screen.
Unlocking the screen
1 Touch the lock symbol
home screen.
2 When prompted to enter a PIN number,
touch or
the PIN code. Touch Select to confirm, and
repeat for the remaining numbers.
When you enter the correct PIN, you'll return
to the thermostat home screen. To re-lock the
screen after you're done making changes, follow
the steps above to apply a lock setting.
or arrows until you see
or arrows until you see
or arrows until you see
or arrows to select your
on the thermostat
to select the first number of
Back Select
Back Select
Back Select
Following Schedule
Mode
Heat
Away Home Sleep
14
Back Select
No Yes
Back Select
No
AM
Fan
Auto
Back Select
Yes