Setting The Time And Date; Cleaning The Thermostat Screen - Honeywell T6 Pro Z-Wave User Manual

Setting the time and date

Setting the time
Touch Menu on the thermostat home screen.
1
2 Touch the
CLOCK, then touch Select.
3 Touch the
TIME, then touch Select.
4 Press or
hold the buttons to move more quickly).
Touch Done when finished.
5 Set clock format (12 hours or 24 hours) and
daylight saving time in the same CLOCK
sub-menu.
Setting the date
1 Touch Menu on the thermostat home screen.
2 Touch the
then touch Select.
3 Touch or
Select to confirm.
4 Continue to set day and year in the same
way. Touch Select to save your changes.

Cleaning the thermostat screen

With the clean screen option, you can lock the
thermostat screen so you don't accidentally
change your settings when you clean. Follow the
steps below to activate clean screen mode.
1 Touch Menu on the thermostat home screen.
2 Touch the
CLEAN SCREEN, then touch Select.
The screen will deactivate for 30 seconds. A
countdown timer will display the amount of time
until screen reactivation.
Tip: To clean the thermostat screen, spray water
or household cleaner onto a cloth, then use
the cloth to clean the screen. Avoid abrasive
cleaners and do NOT spray liquid directly on the
thermostat.
or arrows until you see
or arrows until you see SET
to set the time (or press and
or arrows until you see DATE,
to set the month, then touch
or arrows until you see
Back Select
Back Select
16
Back Select
PM
Done Cancel
Back Select