Table of Contents
Advertisement
12.4. Thermostat Control
• Depending on differences between room temperature and setting temperature, compressor operation is decided and starts
operation.
• If temperature difference matches values shown below, thermostat switches off.
Cooling
Soft Dry
12.5. Indoor Fan Control
12.5.1. Manual Fan Speed
• Fan operation can be set using remote control.
• The indoor fan is operated at High, Medium or Low speed according to remote control setting.
12.5.2. Auto Fan Speed
• According to room temperature and setting temperature, indoor fan speed is determined automatically.
• The indoor fan will operate according to pattern below.
12.5.3. Feedback Control
• Immediately after the fan motor is started, feedback control is performed once every second.
• During fan motor on, if fan motor feedback
increased; fan motor is then stopped and restarted. If the fan motor error counter increased to 7, then fan motor error is detected.
Operation stopped and could not be restarted.
12.6. Outdoor Fan Operation
• Outdoor fan speed changes according to outdoor pipe temperature.
• The fan speed is controlled by the timing of turning the outdoor fan ON and OFF within an interval.
• There unit compares current temperature (T2) with previous (2 seconds before) temperature (T1) and decides the outdoor fan
ON time (X).
Outdoor fan ON time (X) is a variable with the range of 200ms to 1600ms or continuosly ON.
• Every 2 minutes, the outdoor pipe temperature is detected and the outdoor unit fan speed is changed automatically.
0qC
-1.0qC
2550 rpm or <50 rpm continuously for 10 seconds, the fan motor error counter
Judgement
45qC
T2
40qC
T2
45qC & T2
T1
40qC
T2
45qC & T2
T1
35qC
T2
40qC
30qC
T2
35qC & T2
T1
30qC
T2
35qC & T2
T1
T2
30qC
Outdoor fan ON time (X)
X = X + 100ms
X = X + 50ms
X = X
X = X
X = X - 50ms
X = X
X = X - 50ms
30
- Quick Links:
- Specifications
- Outdoor Unit
- Outdoor Unit
Hide quick links:
Advertisement
Table of Contents
