Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
3 Installation
First use: The ChronoPlayer ships with default factory settings, and it is ready to operate when a prepared
media is inserted in (see the chapter Control of the ChronoPlayer with the Folders and the Files).
Caution! Before inserting a storage device (SD card or USB flash drive), it is absolutely necessary to
power off the player.
1. Prepare and insert a quality SD memory card or a USB flash drive.
With an SD card: Choose a quality model. Insert it into the slot to the stop without forcing. To remove
•
it, gently push on the memory card to unlock it.
With a USB flash drive: Choose a quality model. Plug the USB flash drive into the USB receptacle of
•
the player.
-9-
1. Clickable knob for volume
control and the setup menu
2. LCD display (player status
and settings)
3. SD/SDHC memory card
slot
4. Infrared sensor
5. Activity LED
6. Power supply connector of
the player
7. USB host receptacle for
USB flash drive
8. RS-232 serial link
9. Dry-contact inputs
10. Line-level stereo audio
output
© 2016, Waves System
Advertisement
Table of Contents
