Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
Filename
001.mp3
001
063.wav
063
To change the behavior of the player, optional parameters can be added to the filenames. These parameters
have to be enclosed between square brackets ([ and ]). Several parameters can be added to the same
filename.
Tag
[Jxxx]
Jump to a folder after the playback of the file.
[V+xx] or [V-xx] Relative volume setting of the file.
[NT]
Disable the command events.
[RSxxx]
Send an RS-232 frame.
Note: Without any option, the files are played one after another according to the selected mode (random
or sequential) and can be interrupted at any time with an external action.
5.2.1 [Jxxx] - Jump to the Folder xxx at the End of the Playback of the
File
This tag defines the behavior of the player at the end of the playback of the file. It indicates the 3-digit
number (xxx from 000 to 999) of the folder to play after this file.
If the destination folder does not exist, the playback is stopped.
•
An empty target folder is not a special case. Its playback is just instantaneous since there are no
•
files to play. This means that the tags of an empty target folder are applied normally if any. The
playback stops in such a folder unless it has [Jxxx] or [RET] tags.
Filename
My file [J002].mp3
003[J023].mp3
034[J034].wav
This function allows to watch over a file so that a jump action follows. Several files can designate the same
folder as the jump target.
Filename
001 [J100].mp3 After playing the file 001, jump to the folder 100.
002 [J100].wav After playing the file 002, jump to the folder 100.
Table 5: Optional tags pertaining to the filenames
Jump to the folder 002 after playing the file.
Jump to the folder 023 after playing the file 003.
Jump to the folder 034 after playing the file 034. It's not a loop with the file 034 but
a jump to the folder 034.
Example
File No.
Description
Example
Action Performed by the Tag
Example
Action Performed by the Tag
-21-
© 2016, Waves System
Advertisement
Table of Contents
