Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
Appendix A Characteristics
A.I Interfacing and Connectivity
LED status indicator
•
Backlit LCD display – 2x16 characters
•
Clickable knob (Volume/-Menu-)
•
Infrared sensor - Protocol SONY SIRC 12 bits modulated at 38 kHz
•
USB Host 2.0 Full Speed (12 Mb/s), standard "mass storage" driver, type A connector
•
SD/SDHC Card slot
•
RS-232 serial link – 9600, 19200, or 38400 bauds 8N1 on 3.81mm pluggable terminal block
•
8 configurable opto-isolated inputs on 3.81mm pluggable terminal block
•
A line-level 0dB stereo audio output on a standard RCA connector
•
External DC power supply connector –
•
A.II Audio File Formats Supported
MP3 (.mp3): mono/stereo (MPEG layer 3), 16 bits, 44.1 kHz, from 32 kbit/s to 320 kbit/s, CBR
•
(Constant Bit Rate) or VBR (Variable Bit Rate) files
WAV (.wav): mono/stereo, 16 bits, 44.1 kHz (Broadcast Wave Format not supported*)
•
A.III Other File Formats Supported
Timestamped programming file (scheduler.tm2) - Scheduler TM2 (.tm2) format
•
Configuration file (config.txt) – raw text format (.txt)
•
Serial codes file (serial.txt) – raw text format (.txt)
•
A.IV Storage Devices
Accepts SD cards – 64 MB minimum to 4 GB maximum - Formatted in FAT16 and FAT32
•
Accepts SDHC cards – 4 GB minimum - Formatted in FAT32
•
Accepts USB flash drives formatted in FAT16 and FAT32
•
Supports long filenames limited to 63 characters maximum including extension
•
Accepts 1000 folders maximum at the root, containing up to 999 files each
•
A.V Built-in Clock
Maximum clock drift:
•
◦ From 0 to +50 °C: 3.8 ppm – 120 seconds per year
◦ From +50 to +60 °C: 5.0 ppm – 156 seconds per year
◦ Aging: ±3 ppm/year
Timekeeping when the player is not powered: up to 2 months
•
A.VI Power Supply
Player power supply input:
•
◦ Nominal voltage: 12 V DC
◦ Power supply range: 10 V to 15 V DC
Supplied mains adapter input:
•
◦ Voltage: 100 V to 240 V.
◦ Frequency: 50 Hz to 60 Hz.
2.1 mm / 5.5 mm
Ø
-45-
© 2016, Waves System
Advertisement
Table of Contents
