Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
5 Control of the ChronoPlayer with the Folders and
the Files
The naming of the folders and the files define the playback rules. The folders and the files must be named
and copied according to a specific organization described in the following chapters.
5.1 Organization of the Folders
Only one folder level is allowed at the root of the storage
device. The folder names are composed of 3 digits (from
000 to 999) followed by optional parameters and an
optional arbitrary name.
You must not use special or accented characters.
001
003 [J003]
008 folder name
247 [V+02][SEQ] my folder
The first 3 digits represent the folder number, and are
therefore the main part of its name.
The folders are numbered from 000 to 999.
Folder No.
000
Folder number 0 - "AutoPlay" folder, which is automatically played upon power-on.
001
Folder number 1.
034
Folder number 34.
The folder number identifies the folder to be played on startup, or as the target of a jump, or in case of an
input triggering or a scheduled triggering. You can use any number between 000 and 999.
Important: The 8 input contacts allow the triggering of the folder with the number corresponding to the
binary code formed by the states of all the inputs, from 001 to 255. It is possible to reassign the first 15
input codes, either to the playback of another folder, or to another command, with the file config.txt
(see the chapter: Configuration File).
Example
Folder Name
Example
Description
-13-
© 2016, Waves System
Advertisement
Table of Contents
