Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
Parameter Definition
#BUTTON1:NEXT_TRACK The command "next file" is assigned to the button 1.
#BUTTON2:STOP
9.8 Example of a Configuration File
#ID:002
#VOLUME:48
#BAUDRATE:9600
#RS_MONITORING:1
#BOOT:005
#INPUT01:PREV_TRACK
#INPUT02:STOP
#INPUT04:PLAY
#INPUT08:NEXT_TRACK
#BUTTON1:STOP
#BUTTON2:PLAY
In the example above, the configuration file config.txt assigns the following parameters to the player:
Parameter Definition
#ID:002
#VOLUME:48
#BAUDRATE:9600
#RS_MONITORING:1
#BOOT:005
#INPUT01:PREV_TRACK Input combination 1 (input 1) = Previous file.
#INPUT02:STOP
#INPUT04:PLAY
#INPUT08:NEXT_TRACK Input combination 8 (input 4) = Next file.
#BUTTON1:STOP
#BUTTON2:PLAY
Example
The command "STOP" is assigned to the button 2.
Example: config.txt
Player ID for the serial link = 002.
Player volume at power on = 48.
Baud rate of the serial link = 9600 bauds.
Monitoring mode = "Daisy Chain".
AutoPlay folder (played on startup) = 005.
Input combination 2 (input 2) = Stop.
Input combination 4 (input 3) = Play.
Button 1 of the infrared remote control = Stop.
Button 2 of the infrared remote control = Play.
Effect of the Defined Parameter
Effect of the Defined Parameter
-37-
© 2016, Waves System
Advertisement
Table of Contents
