Assign Specific Commands To The Special Buttons Of The Infrared Remote Control - #Buttonx:cmd - ID-AL ChronoPlayer User Manual

Hide thumbs Also See for ChronoPlayer:
Table of Contents

Advertisement

ID-AL ChronoPlayer - User Guide V1.0
Caution! Only the first 15 input combinations (using the first 4 inputs) are reconfigurable (see the Table 1:
Correlation between the inputs and the folder numbers).
Parameter Definition
#INPUT01:PREV_TRACK The first input triggers the playback of the previous file.
#INPUT02:STOP
#INPUT04:PLAY
#INPUT08:NEXT_TRACK The fourth input triggers the playback of the next file.
Parameter Definition
#INPUT03:RS001
#INPUT05:VOLUME_PLUS
#INPUT10:VOLUME_MINUS The combination 10 (inputs 2 and 4) decrements the volume.
#INPUT14:FOLDER999
9.7 Assign Specific Commands to the Special Buttons of the
Infrared Remote Control - #BUTTONx:cmd
The two special buttons of the infrared remote control (see the chapter Infrared Remote Control) are
assigned by default to the volume control. With the file config.txt, it is possible to assign them other
commands.
Parameter Value
PLAY
STOP
NEXT_TRACK
PREV_TRACK
VOLUME_PLUS
VOLUME_MINUS
FOLDERxxx
RSxxx
Parameter Definition
#BUTTONx:cmd
Example of a command keypad using the first 4 inputs
The second input stops the playback.
The third input launches the playback.
Example of commands with combinations of input contacts
The combination 3 (inputs 1 and 2) sends the frame #001 on the RS-232
link.
The combination 5 (inputs 1 and 3) increments the volume.
The combination 14 (inputs 2, 3, and 4) launches the playback of the folder
999.
Table 15: List of the possible commands for #BUTTON
Play the last played file.
Stop the current playback.
Play the next file of the folder being played.
Play the previous file of the folder being played.
Increase the volume by one step.
Decrease the volume by one step.
Jump to the folder xxx - xxx can be a value between 000 and 999.
Send the line #xxx of the file serial.txt on the RS-232 output (with xxx from 000 to
999).
Table 16: #BUTTON parameter syntax
x: the number of the button 1 or 2 - cmd: an option among the list above.
Effect of the Defined Parameter
Effect of the Defined Parameter
Effect of the Value
Description
-36-
© 2016, Waves System

Advertisement

Table of Contents
loading

Table of Contents