Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
7.2 Playback Control Command (PLAY/STOP)
To restart the playback (PLAY) or to stop it (STOP), briefly (less than 3 seconds) press the Volume/-Menu-
knob.
During the playback, this action triggers a STOP command. The player will then display its current
•
date and time after a few seconds.
If no audio file is being played, the folder in which the player is stopped will be played.
•
Note: If no playback operation has preceded this command, or if the player has stopped after
exiting a folder, then this command is ignored.
7.3 Main Volume Control Using the Knob
To change the volume, turn the Volume/-Menu- knob:
counterclockwise to decrease the volume,
•
clockwise to increase the volume.
•
For more information regarding the main volume setup methods, see the chapter Main Volume Control.
7.4 Setup of the Player Clock Parameters
To modify the date and time, as well as the reference time zone of the player, perform a long push (more
than 3 seconds) on the Volume/-Menu- knob in order to access the setup menu.
The first line displays the name of the time zone setup sub-menu. The second line displays the active time
zone rule: either a geographical rule (i.e. a country, with a region if any), or a constant UTC-relative offset.
To browse the setup menu, turn the knob, and validate with a short push on the knob. Once a menu item has
been selected, the parameters are edited sequentially. The focused parameter blinks. To change the
displayed value of the parameter, turn the knob, and validate with a short push on the knob.
For more information about the clock of the player, see the chapter Built-in Clock.
-27-
© 2016, Waves System
Advertisement
Table of Contents
