Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
To change the behavior of the player, optional parameters can be added to the folder names. These
parameters have to be enclosed between square brackets ([ and ]). Several parameters can be added to
the same folder name.
Tag
[Jxxx]
Jump to another folder after the playback of the folder, or play in a loop (i.e. jump to the
same folder at end of playback).
[RET]
Return to the previous folder after the playback of the folder.
[RND] or [SEQ]
Random or sequential playback mode of the folder.
[V+xx] or [V-xx]
Relative volume setting of the folder.
[NT]
Disable the command events.
[RSxxx]
Send an RS-232 frame.
[WHL]
Play the folder while the assigned input combination remains activated.
[NXTxxx]
Play a specific number of audio files from the folder.
Note: If no optional parameters are indicated, the player plays randomly the complete folder, and then
stops. The playback of the folder can be interrupted by a triggering event.
5.1.1 [Jxxx] - Jump to the Folder xxx at the End of the Playback of the
Folder
This tag defines the behavior at the end of the playback of the folder. It indicates the 3-digit number (xxx from
000 to 999) of the next folder to play, which can also be the number of the folder itself in order to play it in a
loop. By default, if this tag is missing, the playback stops at the end of the folder.
Folder Name
001 [J002]
Jump to folder 002 after playing folder 001.
003 [J003]
Jump to folder 003 after playing folder 003 -> create a loop of the 003 folder.
008 [J023]
Jump to folder 023 after playing folder 008.
458 [J999]
Jump to folder 999 after playing folder 458.
To play in a loop some audio files on startup, the folder 000 must be used and tagged with [J000] (default
value that can be modified through the config.txt file (see the chapter Configuration File).
Example: 000[J000]
If the destination folder does not exist, the playback is stopped.
•
An empty target folder is not a special case. Its playback is just instantaneous since there are no
•
files to play. This means that the tags of an empty target folder are applied normally if any. The
playback stops in such a folder unless it has [Jxxx] or [RET] tags.
Table 2: Optional tags pertaining to the names of the folders
Description
Example
Action Performed by the Tag
-15-
© 2016, Waves System
Advertisement
Table of Contents
