Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
Parameter Definition
#RS_MONITORING:1
If the line is missing, the factory setting value by default is used, i.e. 0, no monitoring. (For further information
regarding the RS-232 protocol, see the chapter RS-232 Serial Link Protocol.)
9.5 Choice of the Folder to Play on Startup - #BOOT:xxx
Sometimes, it can be necessary to define the folder to play on startup. By default, the folder 000 is used as
the "AutoPlay" folder.
Parameter Definition
#BOOT:xxx
Parameter Definition
#BOOT:015
If the line is missing, the factory setting value by default is used, i.e. 000 for the folder 000.
If the folder does not exist, the player stops and waits for an instruction.
9.6 Assign Specific Commands to the Inputs - #INPUTxx:cmd
By default, each input combination triggers the playback of the corresponding folder. For a better versatility of
the player, it is possible to assign other commands to the input combinations.
Parameter Value
PLAY
STOP
NEXT_TRACK
PREV_TRACK
VOLUME_PLUS
VOLUME_MINUS
FOLDERxxx
RSxxx
Parameter Definition
#INPUTxx:cmd
The player is in "Daisy Chain" mode.
Table 12: #BOOT parameter syntax
xxx: a number between 000 et 999.
Effect of the Defined Parameter
The contents of the 015 folder are set to be played on startup.
Table 13: List of the possible commands for #INPUT
Play the last played file.
Stop the current playback.
Play the next file of the folder being played.
Play the previous file of the folder being played.
Increase the volume by one step.
Decrease the volume by one step.
Jump to the folder xxx - xxx can be a value between 000 and 999.
Send the line #xxx of the file serial.txt on the RS-232 output (with xxx from 000 to
999).
Table 14: #INPUT parameter syntax
xx: an input from 01 to 15 – cmd: an option among the list above.
Example
Effect of the Defined Parameter
Description
Example
Effect of the Value
Description
-35-
© 2016, Waves System
Advertisement
Table of Contents
