Table of Contents
Advertisement
ID-AL ChronoPlayer - User Guide V1.0
Folder Name
001 [V+05]
Increase the volume level by 5 steps during the folder playback.
001 [V-03]
Decrease the volume level by 3 steps during the folder playback.
At the end of the playback of the folder, the volume level goes back to its previous level.
Note: If the resulting volume is out of the allowed volume range of the player, then it is limited to the
minimum or maximum value.
5.1.5 [NT] – Disable the Command Events during the Playback of the
Folder
The playback of the folders with this tag cannot be interrupted, and it ignores the instructions received,
according to the table below:
Command
Folder change request
Other
Note: Without this option, the playback of the tagged folder can be interrupted at any time by a command
event (input, RS-232, Scheduler, etc.).
Folder Name
001 [NT]
The instructions received are ignored during the playback of the folder 001.
In that case, a command on one of the input contacts, or through RS-232 or other is ignored, and the
playback of the current folder is not stopped.
5.1.6 [RSxxx] - Send Bytes onto the RS-232 Output
When the folder is called, a list of bytes is transferred by the serial link in order to control other devices
(another player, a switching grid, a video projector, etc.). The bytes to send are included in a text file that is
especially created for this purpose.
Baud Rate (bauds)
19200
Note: The baud rate is configurable in the settings file of the player config.txt (see the chapter:
Configuration File).
The xxx parameter of the tag is the number of the frame to send (line ID in the serial.txt file). It is always
Table 3: Commands blocked with the [NT] tag
Inputs
●
●
Table 4: Default settings for the RS-232 link
Start Bit(s)
Data Bit(s)
1
Example
Action Performed by the Tag
Source
RS-232
Scheduler
●
Example
Action Performed by the Tag
Parity Bit(s)
8
0
-17-
Knob Click
●
N/A
Stop Bit(s)
1
© 2016, Waves System
IR Remote
Control
Handshake
None
Advertisement
Table of Contents
