Data Output; Analog Output; How To Change Air Velocity Range - Kanomax Anemomaster 6162 Operation Manual

5. Data Output

5. Data Output

5.1 Analog Output

Output on the measurement screen -------------------------------------- ★ To be output every 0.25 second
Initial Screen: Except when the screen is on hold
Measurement Mode: Except when the calculation result
is displayed or the instrument is
waiting for the next sampling

5.1.1 How to Change Air Velocity Range

Display
< MENU >
1.MONITOR
2.MEASUREMENT
3.DATA OUTPUT
4.MEMORY CLEAR
5.UTILITY
< UTILITY >
1.CALENDAR
2.ANALOG OUTPUT
3.PROGRAM SET
4.RS-232C
(a)
< ANALOG OUTPUT >
1. VELOCITY
2. TEMPERATURE
Analog Output Terminal
Key
MENU (1) Press MENU key.
(2) Select 5. UTILITY.
△, ▽
SET Then press SET key.
(3) Select 2. ANALOG OUTPUT.
△, ▽
SET Then press SET key.
(4) Select 1. VELOCITY.
△, ▽
SET Then press SET key.
★ Output Voltage: DC0 ~ 1V
★ Output Impedance: 47Ω
Output Range
Air Velocity Air Temp.
0 ~ 5 m/s 0 ~ 50 °C
0 ~ 25 m/s 0 ~ 100 °C
0 ~ 50 m/s 0 ~ 200 °C
0 ~ 500 °C
V: Air Velocity
T: Air Temperature
Procedure
30