Table of Contents
Advertisement
3. Measurement Mode
S-TIME (S):
Set the length of sampling (instantaneous value) time.
Configurable sampling time (sec): 1 ~ 6, 10, 12, 15, 20, 30, 40, 50, 60 sec
DATA (N):
Set how many data to be taken every configured sampling time.
Configurable number of data: 1 ~ 6, 10, 12, 15, 20, 30, 40, 50, 60, 100, 120, 150, 180
MEMORY:
When YES, data will be stored in the internal memory.
For details on memory capacity, refer to P22.
When YES, the calculation result will be output to the printer automatically.
PRINT:
When NO, you can still print out the hardcopy of the calculation result by pressing PRINT key
after the calculation result is displayed.
Refer to P24 for printout samples.
3. MEMORY
NO
4. PRINT
NO
5. SET OK!
(a)
<AVE>
ready
T: 00/10
M:015
N: 000/010 P:007
16.8 m/s
127 ℃
<AVE>
T: 01/10
M:015
N: 001/060 P:007
16.8 m/s
127 ℃
<AVE>
T: 10/10
M:016
N: 060/060 P:007
12.8 m/s
126 ℃
<AVE RESULT>
AVE:
12.8 m/s
MAX:
15.8 m/s
MIN : 10.8 m/s
AVE:
126 ℃
MAX:
129 ℃
MIN :
123 ℃
[Measurement Condition]
(7) After measurement condition is set, select 5. SET OK!.
△, ▽
SET
Then press SET key.
(8)
ready
to start a measurement.
START/STOP
Press START/STOP key to start sampling.
☆To go back to the previous screen (measurement condition
setting screen) press △ key.
[Start
☆To stop measuring halfway through: START/STOP or ▽ key.
Measuring]
- The data collected until the measurement is halted will be
☆To cancel measuring (a): Press △ key.
[Stop
Measuring]
- It will go back to screen (a) where the instrument is ready to
☆To cancel a measurement (b): Press MENU key.
- It will go back to the menu screen.
T:01/10···S-TIME(S)
[Calculation
M:015--- used memory (shown in %. When it shows 100 (%),
Result]
N:001/060···DATA (N)
P:007--- the page number where the data is stored
Printing
☆ PRINT:
Example
☆ START/STOP or ▽: ready for measuring (a)
P24
☆ MENU:
will be displayed indicating that the instrument is ready
calculated.
start a measurement.
setting value (sec)
will be increased every second
there is no memory left.)
setting value
will be increased every time data is collected.
If 3.MEMORY NO is selected, it will not be displayed.
hardcopy of the display screen
menu will be displayed.
15
P22
Advertisement
Table of Contents
