Advertisement
BHL Trim
8200 Mortise Lock
Installation Instructions
4
BHL Trim Installation
6. Slide outside lever & rose assembly (or lever
& escutcheon assembly) onto door and
lockbody. (Figure 15)
NOTE:
KEEP DOOR OPEN WHILE INSTALLING
LOCK .
NOTE:
IF INSTALLING TRIM ON ONE SIDE,
SEE SEPARATE INSTRUCTION SHEET .
WHEN SPINDLE ADAPTOR IS INSTALLED
CORRECTLY, LEVER WILL FREE WHEEL UP .
7. Insert spindle into inside trim of lockbody
hub. (Figure 16)
8. Slide adapter plate assembly over spindle
and secure with two (2) #8-32 screws.
9. Tighten rose firmly onto adapter plate
assembly. Align holes and install security set
screw to plate assembly with security torx
screwdriver.
10. Attach inside lever and secure with security
torx screwdriver. Verify lock is operating
correctly prior to closing door.
11. Install lock front using two (2) front screws.
(Figure 17)
1-800-727-5477 • www.sargentlock.com
Copyright © 2017, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the express
written permission of Sargent Manufacturing Company is prohibited.
Inside of
door
Outside of
Figure 15
7
RH Door Shown
door
Figure 16
Figure 17
A8131E 11/17
Hide quick links:
Advertisement
