Prior To Operation; How To Use - Hitachi Rp 35YB Handling Instructions Manual

UNPACKING
Carefully unpack the power tool.
Take out the accessories in the tank before work.

PRIOR TO OPERATION

WARNING
Before use, check the following. 1 to 3 should be
checked before putting the plug in the power
receptacle.
1. Confirm the power supply used.
Be sure to use the appliance with the voltage
indicated on the nameplate. If it is used with the
voltage exceeding the indication, the rotation of the
motor may be abnormally fast, damaging the
appliance. Moreover, do not use the appliance with
transformers, such as a DC power supply, an engine
generator, and a booster, or not only the appliance
will be damaged, but accidents may be caused.
2. Confirm that the vacuum switch is OFF.
If, without knowing that the vacuum switch is ON,
the plug is put in the power receptacle, the appliance
will start suddenly, causing unexpected accidents.
The vacuum switch will be turned on by pushing
"ON" and it will be turned off by returning it to
"OFF". Be sure to check that the vacuum switch
is OFF. (Fig. 10)
3. Check the filter
Referring to "2. Attaching the Filter" the filter should
be correctly attached.
4. Inspection of the power receptacle
If, when the plug is inserted, the power receptacle
is shaky or the plug readily comes off, repair is
required. Consult the electrical work shop nearest
you. If such a power receptacle is used as it is, it
will be overheated, and causing accidents.
5. Extension cord
WARNING
Use undamaged extension cord. If the power supply
is distant, use an extension cord which is thick
enough to pass an electric current and is as short
as possible.

HOW TO USE

CAUTION
Do not use the head top as a footstool or do not
sit on it. Otherwise the appliance begins to move
suddenly, causing an injury.
NOTE
Handle the hose with care. Do not bend the hose
by force, or do not trample it, or do not pull it to
move the dust extractor. Moreover, do not put away
the hose as it is bent. Otherwise troubles such as
its deformation may be caused.
1. Connecting the hose
Press the attached hose into the suction opening
of the tank until it clicks and connect it. When
removing the hose, pull out the hose while pushing
the button of the suction opening. (Fig. 5)
2. Attaching the filter (Fig. 6)
WARNING
Be sure to attach the filter. (cloth filter or filter for
dusts) Otherwise the motor will be damaged.
When you collect fine dusts, such as siding powder
and stone powder, use the optional paper filter. [in
the case of RP35YB]
Since it is a filter for dry and wet suction, do not
remove it when you suck up liquids, such as water.
[in the case of RP35YB]
NOTE
If the filter is wet, leave it to dry out of direct
sunlight. Using the filter when wet will conspicuously
reduce the suction power.
(1) Check that the filter packing is put on the mouth
of the tank.
(2) Check that the filter cage is on the bottom of the
filter. [in the case of RP35YB]
3. Attach the master nozzles, pipes, etc.
When it is used as a cleaner (Fig. 7)
Connect in order of Hose (id 38 mm
Joint handle, Pipes, and Master nozzle. Connection
is done by pressing in the direction of the arrow.
The suction mouth for crevices can also be attached
depending on the application.
4. Connect power tools (Fig. 8)
Connect in order of Hose (id 38 mm
and Adapter (Standard Accessory). Connection is
done by pressing in the direction of the arrow.
5. How to use the interlocking electric outlet
WARNING
Voltage is applied to the interlocking electric outlet
irrespective of the position of the vacuum switch or
mode selection switch in this appliance. When you
put the plug of a power tool in the interlocking electric
outlet, check that the switch of the power tool is OFF.
If, without knowing that the vacuum switch is ON,
the plug is put in the power receptacle, the appliance
will start suddenly, causing unexpected accidents.
Do not connect the power tool exceeding the
following power consumption to the interlocking
electric outlet. Otherwise an overcurrent will cause
failures of the interlocking circuit or plug or an
injury. Connect the power tool exceeding the
following power consumption to an outlet other
than the power receptacle to which the plug of this
appliance is connected. 2300 W of the power
consumption for the power tool.
NOTE
If a product containing a winding transformer is
connected to the interlocking electric outlet, the
appliance will be interlocked for about 5 seconds,
which does not mean any failure.
(1) Check the power consumption of the power tool to be
connected
This appliance can be connected to a power tool
whose power consumption is 2300 W. Check the
power consumption of the power tool to be
connected. For a power tool exceeding the above,
connect it to an outlet other than the power
receptacle to which the plug of the appliance is
connected. In this case, the appliance cannot be
operated or stopped by the operation of the switch
of the power tool.
(2) Connect the plug of a power tool (Fig. 9)
Raising the cover, put the plug of the power tool
in the interlocking electric outlet.
English
3 m long),
×
3 m long)
×
14