Supermicro SUPERSERVER 8016B-TLF User Manual page 84

S S
UPER ERVER 8016B-TLF User's Manual
PCIE Ports Confi guration
PCIE Port 0 ~ PCIE Port 4
This feature is used to confi gure PCI-E port settings. Select Auto to allow a speci-
fi ed PCIE port to be enabled if a PCIE device is detected. The settings are Auto,
Enabled and Disabled.
PCIE High Priority Port
This feature allows the user to select the PCIE High Priority port. The settings are
Disabled, Port 0, Port 1, Port 2, Port 3, Port 4, and Port 5.
PCIE Port 0 IOxAPIC Enable ~ PCIE Port 5 IOxAPIC Enable
Select Enable to enable IOxAPIC support for a PCIE port specifi ed. The settings
are Enabled and Disabled.
IDE/SATA Confi guration
When this submenu is selected, the AMI BIOS will automatically detect the presence
of the IDE/SATA devices, and displays the following items.
SATA#1 Confi guration
If Compatible is selected, it sets SATA#1 to the legacy_compatible mode. Select-
ing Enhanced sets SATA#1 to the native SATA mode. The options are Disabled,
Compatible and Enhanced.
Confi gure SATA#1 as (Not available when SATA#1 Confi guration is
disabled)
Use this feature to select the drive type for SATA#1. The options are IDE, RAID
and AHCI. (When the option-RAID is selected, the item-ICH RAID Code Base
will appear. When the option-AHCI is selected, the item-ICH AHCI Codebase
will be available.)
ICH RAID Code Base (Available when the option-RAID is selected.)
Select Intel to use Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID
settings. Select Adaptec to use Adaptec's SATA RAID fi rmware to confi gure
Adaptec's SATA RAID settings. The options are Intel and Adaptec.
ICH AHCI Codebase (Available when the option-AHCI is selected.)
Use this feature to select the AHCI Codebase for the ICH South Bridge. The
options are BIOS Native Module and Intel AHCI ROM.
7-14