Table of Contents
Advertisement
S
S
UPER
ERVER 8016B-TLF User's Manual
BMC Enable
Jumper JPB1 allows you to enable
the embedded WPCM 450 BMC
(Baseboard Management) Controller
to provide IPMI 2.O/KVM support on
the motherboard. See the table on the
right for jumper settings.
BMC Reset
Use jumper JPRST1 to reset the BMC
settings on the motherboard. See the
table on the right for jumper settings.
ME Recovery
J36 (JPME2) is used for ME Firmware
Recovery mode, which will limit system
resource for essential function use
only without putting restrictions on
power use. In single operation mode,
online upgrade will be available via
Recovery mode. See the table on the
right for jumper settings.
Manufacturer Mode Select
Close jumper J35 (JPME1) to bypass
SPI fl ash security and force the sys-
tem to use Manufacturer Mode, which
will allow the user to fl ash the system
fi rmware from a host server to modify
system settings. See the table on the
right for jumper settings.
BMC Enable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
BMC Reset
Jumper Settings
Jumper Setting
Closed
Open
ME Recovery
Pin Defi nitions
Pin# Defi nition
1
No Connection
2
Signal
3
Ground
ME Mode Select
Jumper Settings
Jumper Setting
1-2
Manufacture Mode
2-3
Normal (Default)
5-22
Defi nition
BMC Enable
Normal (Default)
Defi nition
BMC Reset
Normal (Default)
Defi nition
Advertisement
Table of Contents
