WIT-300H User Manual
Issue: 0.4C
( Unscreened Transfer
When the called station begins to ring,
Press [ End ] (
Then, a message is displayed on the LCD of the called station. If the call is not answered within 30
seconds, recall ring is ringing at both stations. At this time, press Send button then a user will be
connected with the transferred call again.
Condition
1. The Primary Call must be answered before transfer can be initiated.
5.3.4
Holding the Call
Description
A user can hold the current call and connect another call or receive a call by another user with being hold
the present call.
Operation
To hold a call
On the call
Press [ Hold/Save ] (
Figure x. Holding an ICM call
Figure x. Holding an CO call
1. Press [Hold] to hold a present call. The hold music is heard to the held user.
To retrieve the ICM call during a holding
Press [KTU] (left key in navigation) + select {ICM} button + [ OK ]
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
EMBED PBrush
) button or [KTU]+{HOLD}
24
Date: 24/May/2005
) to complete the transfer after ring back tone is heard.