Table of Contents
Advertisement
WIT-300H User Manual
Issue: 0.4C
Operation
Note : Even though an Ear-Mic is attached to a WIT-300H, a user can hear key tone sound through the
Speaker not Ear-Mic.
Condition
1. If user dials a wrong digit, a user can erase last 1 digit by pressing [Clear/Prev] button once and if
you want to erase all digits, press [Clear/Prev] button for longer than 1 second.
2. Every time pressing each button, it is displayed of the LCD.
3. If pressing side button [ UP ( ) ], [ DOWN ( ) ] during conversation, the receiving voice level is
controlled.
4. When conversation is over, press [End] (
disappeared and then the call will be cut off.
5. Call duration time(HH:MM) is displayed on the LCD.
(HH = 00~23, MM=00~59).
5.3.2
Taking an Incoming Call
Description
When the phone rings or vibrates, press any key except end key.
Operation
Incoming Ring → Press [ Send ](
Incoming CO ring is heard and a message come from iPECS is displayed on the LCD.
Notes : If an Ear-Mic is attached to a WIT-300H, it can receive an incoming call by pressing button on
the Ear-Mic while a ring sounds. (LGE Ear-Mic only)
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
① Enter phone number to connect a call
② Press Send key (
③ Phone Icon (
④ The connection tone is heard when
) button. Then the phone (
) → Connection.
22
Date: 24/May/2005
)
) is show on the LCD
during trying to connect.
connection is completed.
) icon is will be
Advertisement
Table of Contents
