Download Print this page

Advertisement

.
WIT-300H
Installation Manual
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
AND MAY NOT BE REPRODUCED OR COPIED WITHOUT
EXPRESS WRITTEN PERMISSION OF A DULY AUTHORIZED
REPRESENTATIVE OF LG ELECTRONICS COMPANY
Jan. 30-2005
LG Electronics, Inc.

Advertisement

   Also See for LG WIT-300H

   Related Manuals for LG WIT-300H

   Summary of Contents for LG WIT-300H

  • Page 1

    WIT-300H Installation Manual THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND MAY NOT BE REPRODUCED OR COPIED WITHOUT EXPRESS WRITTEN PERMISSION OF A DULY AUTHORIZED REPRESENTATIVE OF LG ELECTRONICS COMPANY Jan. 30-2005 LG Electronics, Inc.

  • Page 2

    Dec. 03/04 Second Review & Modification 0.1C Jan. 30/05 SJ HWANG MFIM Registration & USB/TFTP Downloaing This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 3: Table Of Contents

    4.1 USB S/W D ......................21 OWNLOADING 4.2 TFTP S/W D ......................23 OWNLOADING CONSOLE CONNECTION ............... 24 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 4

    Date:: 30/Jan/05 REFACE The main objective of this document is to provide an instruction for proper installation of WIT-300H. Mechanical feature is simply described and operation condition is precisely addressed to prevent the WIT-300H from malfunctioning by environmental reason. In advance of the environmental consideration, please refer to this document it will help an installer in setting up basic circumstance for normal operation of the WIT-300H.

  • Page 5: Safety Instructions

    When you do not use the phone for a long period time, store it in a safe area with the power cord unplugged. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 6: Cautions For Battery

    Do not expose to high temperature: 60°C (140°F). To obtain a replacement battery, contact your local wireless dealer or carrier. Use only the batteries that have one of the following LG Part No. : Battery Pack(Standard) 3.7V Li-ion WIT-300H 050128P. Battery Disposal Please dispose of your battery properly or bring to your local wireless carrier for recycling.

  • Page 7

    WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 8

    This Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by LG including the use Of Non-LG antennas, could void the user’s authority to operate this device.

  • Page 9

    Canadian regulations. For further information contact your Local Industry Canada office. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 10: Getting Started

    Using the phone near receiving equipment (i.e., TV or radio) may cause interference. Keep your phone in a safe place when not in use. Only use the batteries, antennas, and chargers provided by LG. Using unauthorized accessories could void your warranty.

  • Page 11: Wireless Network Cell

    In terms of the transfer speed, it is inferior to 802.11g compliant phone supporting 54Mbps, while, the cell coverage of 802.11b based WIT-300H can be wider than any other devices matched with 802.11g. For more detail information of cell planning, please refer to the manual of AP.

  • Page 12: Access Point

    APs for a cell, we recommend you to use the same SSID for each AP. iPECS LIK-300 The iPECS LIK-300 is a call controller of the WIT-300H. Any activity of WIT-300H is notified to the iPECS LIK-300, therefore, it should be placed within a same LAN subnet. However, in remote mode, the WIT- 300H can interact with iPECS LIK-300 out of the subnet.

  • Page 13: Where Lik-300 Is Positioned In The 802.11b Network

    Issue: 0.1C Date:: 30/Jan/05 APs are connected to a HUB in subnet, since WIT-300H is able to access the Internet. The iPECS LIK- 300 and WIT-300H system work on top of this context. Where LIK-300 is positioned in the 802.11b network.

  • Page 14: Ssid

    SSID is for authentication use. An AP can have an arbitrary SSID value for example “wireless”. In this case, WIT-300H with “wireless” SSID can communicate with that AP. It is important to use accurate SSID on both WIT-300H and AP.

  • Page 15

    (1) Open a page “Network Interfaces > Settings” . You can see a edit box “DTIM”. (2) Enter 1. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 16

    (1) Open a page “Setup > Basic Info” . You can see a edit box “SSID”. (2) Enter SSID. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 17

    (1) Open a page “Wireless Settings > Configuration” . You can see a edit box “SSID”. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 18: Network Parameters

    Network parameters such as IP address, netmask, gateway are also to be configured since AP is bridging between the WIT-300H and the iPECS LIK-300. They are all to be set up with the same values to those in iPECS LIK-300.

  • Page 19: Wit-300h Registration

    It indicates that WIT-300H phone is registered into the iPECS LIK-300. WIT-300H Registration WIT-300H is recognized as one of the wired phone by iPECS MFIM. The registration can be completed by two modes like the LIP phone; Remote mode and Local mode. If you could use the MFIM located in your local LAN area, you can register your phone in local mode, otherwise, you should use remote mode.

  • Page 20: Local Mode

    C. When you use dynamic IP address, (1) Set “DHCP mode” to “Yes” at “ (MENU) > Settings > Network > DHCP ” After setting these all up, please turn off WIT-300H and then turn it on. 3.2.2 Local mode...

  • Page 21: S/w Upgrade

    (3) Drv_M.bin : It is the compressed collection of graphic widgets; icon, bitmap, images, etc. USB S/W Downloading USB is the easiest interface for customer to download S/W image into WIT-300H. Just plugging in a USB cable into PC keeping the image is a manual job for the downloading. The following “Flash-up” S/W needs to be installed in the PC.

  • Page 22

    (2) Turn on WIT-300H. The Windows detects new device through USB connection, and requires Driver S/W to be installed by popping up a window indicating the installation of new driver S/W for the WIT-300H. A. Installing driver (1) Unzip S/W zip file.

  • Page 23: Tftp S/w Downloading

    (wit300hDbg.bin) TFTP transaction is under progress and blocks of images are delivered from TFTP server This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 24: Console Connection

    Setting parameter is 115200 baudrate, no flow control, 1 stop bit, no parity. B. Console command (1) ping - To make sure that you can access TFTP server from WIT-300H. It is can be done by This Document Contains proprietary information and may not be reproduced or copied without express...

  • Page 25

    Issue: 0.1C Date:: 30/Jan/05 trying ping test at the WIT-300H. For the ping test, if the IP address of TFTP server is 10.10.10.221, enter “ ping “10.10.10.221” “. DO NOT FORGET DOUBLE QUOTATION AROUND THE IP ADDRESS PARAMETER. The reply should be printed on the console successfully.

Comments to this Manuals

Symbols: 0
Latest comments: