Download Print this page

Advertisement

.
WIT-300H
User Interface Operation Manual
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
AND MAY NOT BE REPRODUCED OR COPIED WITHOUT
EXPRESS WRITTEN PERMISSION OF A DULY AUTHORIZED
REPRESENTATIVE OF LG ELECTRONICS COMPANY
March 08-2005
LG Electronics, Inc.

Advertisement

   Also See for LG WIT-300H

   Related Manuals for LG WIT-300H

   Summary of Contents for LG WIT-300H

  • Page 1

    WIT-300H User Interface Operation Manual THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND MAY NOT BE REPRODUCED OR COPIED WITHOUT EXPRESS WRITTEN PERMISSION OF A DULY AUTHORIZED REPRESENTATIVE OF LG ELECTRONICS COMPANY March 08-2005 LG Electronics, Inc.

  • Page 2: Revision History

    According to displaying caller name in a phone book at 4.1.3 Ringing / Call Status Display, 5.1.8 Caller ID, 5.3.3 Transferring The Call. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 3: Table Of Contents

    5.1.6 S .......................18 IGNAL TRENGTH 5.1.7 S ........................19 PEED IALING 5.1.8 C ID...........................19 ALLER This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 4

    + 6] ....................47 HONE NFORMATION 6.6.2 S/W V ........................48 ERSION 6.6.3 N .....................48 ETWORK NFORMATION This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 5

    The aim of this manual is to provide conceptual information on the use and operation of key phone system feature in WIT-300H. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 6: General Description

    Purpose The following functional specification details the requirements for the development of a WIT-300H. The features that are explained in this document describe the User Interface and specification for WIT-300H. Topology The WIT-300H is interfaced with LG IPECS LIK system and IP LDK system directly.

  • Page 7: Wit-300h Toolkit

    The unit uses DSSS(Direct Sequence Spread Spectrum) technology and be compliant with FCC part 15. The diagram on the next page illustrates the WIT-300H button layout. This Document Contains proprietary information and may not be reproduced or copied without express...

  • Page 8: Diagram Of The Wit-300h Phone

    16 characters x 2 lines Type: 65K color graphic LCD Dot: 128 x 128 dot matrix This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 9: Technical Specifications

    SSID / AP Probe IPECS IP-KTS setup MFIM IP address Conference call 3 way MSG Callback This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 10: Regulatory Specifications Of Wit-300h

    EN 60950 ESD : 10KV (No Effect to Voice Quality), 15KV (No Damage) EMC others This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 11: User Interface

    300H Phone of iPECS systems LCD Display The LCD of the WIT-300H has nine icons and 65K color graphic. The LCD shows different wireless states and displays visual feedback for the actions performed by user. The display provides a user with visual feedback for all the actions performed by user.

  • Page 12: Idle Mode Display

    The LCD display is divided into two parts; Rectangle area and Time/Date area. Within rectangle area, the status of WIT-300H is displayed. In an idle mode, only station number is shown as “STATION 100”. Time/Date area displays time and date received from the system after successful registration.

  • Page 13: Ringing / Call State Display

    Buttons and Functions 4.1.1 Buttons and Functions The WIT-300H has 10 digit buttons and 17 feature buttons. 1) Digit Buttons 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 2) Feature Buttons *, #, [SEND], [END], [UP], [DOWN],[LEFT],[RIGHT],[OK],[LSK],[RSK], [Hold/Save], [Clear/Prev], [Trans/PGM],[VOL UP], [VOL DOWN], [PTT] Note: [LSK] means Left Soft Key and [RSK] means Right Soft Key.

  • Page 14

    It is volume up and down of the voice. In ringing mode It is volume up and down of the ring. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 15: Ring And Message Led

    If the word is still incorrect after typing completely, press the ‘*’ key once or more to cycle through the other word options. Example This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 16: Using The Abc Mode

    Telephone Features Registration The WIT-300H is recognized as one of the LIP phones by IPECS system. Likewise, the WIT-300H system is to be registered for successful call processing by IPECS system. The registration is accomplished in two phases; wireless LAN connection establishment, MFIM registration.

  • Page 17: Mfim Setup

    5.0.2 MFIM setup MFIM IP address WIT-300H should know the IP address of MFIM to initially request registration. For setup of MFIM IP address please refer to subsection 6.5.5. Network mask Since MFIM of IPECS resides in wired network, network mask should be specified as well. For setup of MFIM network mask, please refer to subsection 6.5.5.

  • Page 18: Using Manner And Lock Mode Quickly

    The ringer volume can be adjusted through the menu. The key beep volume is adjusted through the menu. 5.1.6 Signal Strength. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 19: Speed Dialing

    5.1.9 AP Probing. WIT-300H has an ability to detect all reachieable APs. It shows the list of SSIDs configured in the APs. User can choose one of them under his preference. On the AP probing, please refer to section, 6.5.4.

  • Page 20

    WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 Main Menu Submenu Main Menu Submenu This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 21: Main Menu Tree

    Description A user can make a call to a certain user in his systems or external party by dialing. button is used to make a call. Currently, WIT-300H tries to make a call in only a case that you press button.

  • Page 22: Taking An Incoming Call

    ④ The connection tone is heard when connection is completed. Note : Even though an Ear-Mic is attached to a WIT-300H, a user can hear key tone sound through the Speaker not Ear-Mic. Condition 1. If user dials a wrong digit, a user can erase last 1 digit by pressing [Clear/Prev] button once and if you want to erase all digits, press [Clear/Prev] button for longer than 1 second.

  • Page 23: Transferring The Call

    WIT-300H User Manual Issue: 0.4C Date: 24/May/2005 Notes : Even though an Ear-Mic is attached to a WIT-300H, a user can hear incoming call ring tone sound through the Speaker not Ear-Mic. Condition 1. When audible signals are heard, the call information will be displayed.

  • Page 24: Holding The Call

    To retrieve the ICM call during a holding Press [KTU] (left key in navigation) + select {ICM} button + [ OK ] This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 25: Call Forward

    Condition 1. The Call must be answered before Hold can be initiated. 2. The WIT-300H will receive hold recalling after hold recall timer. At this time, WIP-Phone can answer the ring by pressing Send button. 3. Only 1 call at a time may be placed on hold 4.

  • Page 26: Call Waiting

    3. activating One-Time DND, or 4. ignoring the Camp-On tone. Operation During Called party is busy This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 27: Call Park

    ① The CO line being used is on hold and the WIP-Phone goes to an idle state. Retrieving a parked call Dial a parking location + Press [ Send ]( This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 28: Call Pick-up

    PARKING LOCATION NUMBER IPECS 601 – 610 for MFIM, 601-619 for MFIME Notes : A Parking Location Area will be changed by LG Condition 1. Call Park is only applied to a user that is in talk status. 2. Call Park is only applied to a parking location area.

  • Page 29: Message Wait / Call Back

    When a user doesn’t want to receive a call, this function can be used. Operation This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 30: System Speed Dial

    Flex Functions Description : Unlikely with LIP phone, the WIT-300H does not have physical FLEX buttons, therefore, we implement FLEX button by S/W emulation. Through this interface, you can handle FLEX buttons as the same as a use does with LIP phones.

  • Page 31: Ptt Groups

    PTT Groups Description Each WIT-300H station is assigned to receive PTT announcements from each PTT group. A station can be assigned to any, all or no groups. This function is make WIT-300H join in a PTT group defined in iPECS. Operation...

  • Page 32

    Date: 24/May/2005 A user just press “PTT” button. PTT receiver The idle screen of the WIT-300H transits as follows, and the speaker is opened. Condition PTT group should be defined in the iPECS system. This Document Contains proprietary information and may not be reproduced or copied without express...

  • Page 33: Menu Features

    Date: 24/May/2005 Menu Features WIT-300H offers a set of functions that allow you to use and customize the phone. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked left soft key ) and right soft key ( Each menu and sub-menu allows you to view and alter the settings of a particular function.

  • Page 34: Search [menu+1+2]

    Suppose that you associated phone number “123” with speed dial “1”, Enter a speed dial number from 1 to 99 and Press [Send]. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 35: Delete All [menu + 1 + 5]

    You can write and edit a single text message up to 100 characters and send a message to maximum 20 different numbers. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 36: Inbox

    4. If you receive a incoming ring during writing a message, you will lost a message. 6.3.2 Inbox A user can browse the messages stored in his mail box. Any messages arrived in the WIT-300H is stored in this mailbox. Condition 1.

  • Page 37: Tools [menu + 4]

    2. Select Schedule and press the key. 3. The monthly view is displayed. 4. Initially, the cursor appears on today’s date according to your WIT-300H settings. 5. You can move the date cursor to the desired location using the up, down, left and right navigation keys.

  • Page 38

    4. The date corresponding to the configured holiday is represented in green in the Monthly schedule management screen. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 39: Memo

    This menu allows you to write down small amount of manuscript of what you have to remember. You can make 30 memos. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 40: Alarm Clock

    Select bell: Select the bell to use for the alarm using the navigation key. Input memo: Input alarm name. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 41: Calculator

    1. In the list, you can not go to a wanted list by pressing dial button in case of more than 9. 6.4.6 D-day This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 42: Settings [menu + 5]

    This menu determines the incoming call notification mode. You can select from Crescendo, Ring, Vibration, Ring after vibration, Ring & Vibration, Mute, and Vibrate once. Ring Tone This menu determines the ring tone for incoming call notification. WIT-300H supports 50 different ring tones. Ring Tone Volume This menu determines the ring tone volume for incoming call notification.

  • Page 43: Display

    Issue: 0.4C Date: 24/May/2005 Power-on Tone This menu determines the switch on effect that is sounded when the WIT-300H is turned on. Power-off Tone This menu determines the switch off effect that is sounded when the WIT-300H is turned off.

  • Page 44: Security

    6.5.3 Security Security options are provided to lock the WIT-300H for privacy. When one of the lock mode is enabled, the user should enter password in advance of normal operation. This Document Contains proprietary information and may not be reproduced or copied without express...

  • Page 45: Network

    Date: 24/May/2005 Lock Phone User can lock the phone. If a user locks the phone, WIT-300H ask the user to enter password on trying to use it. A user can also change the password for the lock mode here. Reset Default It changes sound setting and display settings.

  • Page 46: Ktu Setting

    Direct Send WIT-300H can automatically discover MFIM if this value is entered as FALSE. Even if a user do not know MFIM IP address, the user can register to the MFIM by setting this value as FALSE. And even if there are more than one MFIM in same IP subnet, a user can selectively register to a MFIM by setting this value as TRUE.

  • Page 47: Key Lock

    You can add a word to the T9 dictionary. This word can be found in T9 editing by pressing ‘*’ key Note: 1. This editing mode support Abc, ABC, abc. Phone Information [Menu + 6] This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company...

  • Page 48: S/w Version

    Issue: 0.4C Date: 24/May/2005 6.6.2 S/W Version. You are allowed to see the S/W version of the WIT-300H. 6.6.3 Network Information. This menu have 3 sub-menu; MAC address, Serial Number, and IP Address. This Document Contains proprietary information and may not be reproduced or copied without express...

Comments to this Manuals

Symbols: 0
Latest comments: