Table of Contents
Advertisement
Operating in Dusty or Sandy Conditions (Such as Unpaved or Dusty Roads)
Every 7,500 mi (12,000 km),
six months or 300 engine
hours
Every 15,000 mi
(24,000 km), 6 months or
600 engine hours
Every 30,000 mi
(48,000 km)
1
Vehicles with dual rear wheels should rotate the front wheels when specified; rear wheels
only if unusual wear is noted.
2
Reset the Intelligent Oil-Life Monitor after engine oil and filter changes.
As required
Every 7,000 mi (12,000 km),
six months or 300 engine
hours
Every 7,000 mi (12,000 km)
or 300 engine hours
F650750 (TBC) , enUSA, Edition date: 201708, First Printing
Scheduled Maintenance
Inspect the steering and suspension ball joints and tie rods.
Lubricate any grease fittings.
Change the engine oil and filter.
Inspect and lubricate the U-joints.
Replace the engine-mounted and frame-mounted fuel
filters.
Replace the air inlet foam filter.
Off-road Operation
Inspect functional holes in each leg of the twin exhaust
tips and the holes under the shield just inboard of the right
rear tire to make sure they are clean and clear of debris or
foreign materials. Refer to the Vehicle Care chapter of your
owner's manual for more information.
Inspect the steering and suspension ball joints and tie rods.
Lubricate any grease fittings.
Rotate the tires
tread depth.
Inspect the brake system pads and rotors.
Inspect the air filter restriction gauge. Replace the filter if
necessary.
Change the engine oil and filter.
337
2
1
, inspect the tires for wear and measure
2
Advertisement
Table of Contents
