Environment; Protecting The Environment; Noise Pollution Control - Ford F-650 2018 Owner's Manual

Table of Contents

Advertisement

PROTECTING THE

ENVIRONMENT

You should play your part in protecting the
environment. Correct vehicle usage and
the authorized disposal of waste, cleaning
and lubrication materials are significant
steps toward this aim.
For details about Ford Motor
Company's sustainability progress and
initiatives visit:
Web Address
www.sustainability.ford.com

NOISE POLLUTION CONTROL

In order to keep to the federal exterior
noise regulations, your vehicle may be
equipped with noise emission items.
Depending on your vehicle configuration,
it may have all or some of the following
items:
Air Intake System
Inspect the air cleaner. Do not alter its
location. Do not alter inlet and outlet
piping.
Body
Inspect wheel well splash shields, cab
shields and under hood insulation for
deterioration, dislocation and orientation.
Cooling System
Inspect the fan for blade damage. If
you find any damage, replace with the
recommended parts. Inspect for
fan-to-shroud interference and any
damage to shroud, such as cracks and
holes.
Do not change fan ratio or alter fan
spacer dimensions and positions.
F650750 (TBC) , enUSA, Edition date: 201708, First Printing
Environment
Inspect fan clutch for proper operation.
Make sure the fan is disengaged when
cooling of the engine is not required.
Inspect radiator shutters (if equipped)
for proper operation. The shutters
should be open during normal
operating temperatures.
Engine
Valve covers and block covers damp-out
engine mechanical noise. If they need
replacing, make sure to replace them with
the recommended parts. Check for
mechanical isolations.
Transmission Enclosure
Inspect for cracks, holes and tears. Clean
any deposits, such as oil, dirt and stones.
Exhaust System
Inspect for leaks at various joint
connections and loose clamps.
Perform a visual inspection for cracks
or holes in the muffler and tail pipe.
Always use the recommended
replacement parts.
Do not change the tail pipe elbow or
offset tail pipe orientation from the
standard position as originally received.
To avoid abnormal changes in vehicle
sound levels, it is necessary for the
owner to perform inspections and
necessary maintenance at specified
intervals. See Scheduled
Maintenance (page 320).
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

F-750 2018

Table of Contents