Table of Contents
Advertisement
USING VOICE RECOGNITION
This system helps you control many
features using voice commands. This
allows you to keep your hands on the
wheel and focus on what is in front of you.
Helpful Hints
•
Make sure the interior of your vehicle is
as quiet as possible. Wind noise from
open windows and road vibrations may
prevent the system from correctly
recognizing spoken commands.
•
After pressing the voice button, wait
until after the tone sounds and
Listening appears before saying a
command. Any command spoken
before this does not register with the
system.
When prompted you can say any of the following:
Voice command
Bluetooth Audio
Cancel
Line In | Aux | Audio In
Phone
USB [1]
Voice Settings | Voice
Preferences
Help
You can say any of the voice commands that appear within open and close brackets that
are separated by |. For example, where (line in| Aux | Audio In) appears you say; line in,
aux or audio in.
You do not need to say words that appear within square brackets. For example, for where
USB [1] appears, you can say just USB.
F650750 (TBC) , enUSA, Edition date: 201708, First Printing
SYNC
•
•
Initiating a Voice Session
E142599
Steering Wheel (page 46).
If you want the system to carry out the following
Stream audio from your phone.
Cancel the requested action.
Access the device connected to the auxiliary input jack.
Make calls.
Access the device connected to your USB port.
Adjust the level of voice interaction and feedback.
Hear a list of voice commands available in the current mode.
287
Speak naturally, without long pauses
between words.
At any time, you can interrupt the
system while it is speaking by pressing
the voice button.
Initiate a voice session by
pressing the voice button on the
steering wheel controls. See
Advertisement
Table of Contents
