ECS kt600-a User Manual page 65

Video Off Method (DPMS Support)
This item defines how the video is powered down to save power. This item is
set to DPMS (Display Power Management Software) by default.
MODEM Use IRQ (3)
If you want an incoming call on a modem to automatically resume the system
from a power-saving mode, use this item to specify the interrupt request line
(IRQ) that is used by the modem. You might have to connect the fax/modem
to the motherboard Wake On Modem connector for this feature to work.
Soft-Off by PWRBTN (Instant-Off)
Under ACPI (Advanced Configuration and Power management Interface) you
can create a software power down. In a software power down, the system can
be resumed by Wake Up Alarms. This item lets you install a software power
down that is controlled by the power button on your system. If the item is set
to Instant-Off, then the power button causes a software power down. If the
item is set to Delay 4 Sec. then you have to hold the power button down for
four seconds to cause a software power down.
Power On After Power Fail (Off)
This item enables your computer to automatically restart or return to its last
operating status after power returns from a power failure.
IRQ/Event Activity Detect
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
VGA
LPT & COM
HDD & FDD
PCI Master
Resume by PCI PME
Resume by Ring
RTC Alarm Resume
x Date (of Month)
x Resume Time (hh:mm:ss)
IRQs Activity Monitoring
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
This item opens a submenu that enables you to set events that will resume
the system from a power saving mode.
VGA (Off)
When set to On, the system power will resume the system from a power sav-
ing mode if there is any VGA activity.
LPT & COM (LPT/COM )
When this item is enabled, the system will restart the power-saving timeout
IRQ/Event Activity Detect
[OFF]
[LPT/COM]
[ON]
[OFF]
[Disabled]
[Disabled]
[Disabled]
0
0 0 0
[Press Enter]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
43
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults