Advanced Bios Setup - ECS kt600-a User Manual

Drive A/Drive B (1.44M, 3.5 in./None)
These items define the characteristics of any diskette drive attached to the
system. You can connect one or two diskette drives.
Floppy 3 Mode Support (Disabled)
Floppy 3 mode refers to a 3.5-inch diskette with a capacity of 1.2 MB. Floppy
3 mode is sometimes used in Japan.
Video (EGA/VGA)
This item defines the video mode of the system. This motherboard has a built-
in VGA graphics system; you must leave this item at the default value.
Halt On (But keyboard)
This item defines the operation of the system POST (Power On Self Test) rou-
tine. You can use this item to select which types of errors in the POST are
sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. These
are display-only fields. You cannot make changes to these fields.

Advanced BIOS Setup

This screen contains industry-standard options additional to the core PC AT
BIOS.
Phoenix – AwardBIOS CMOS Setup Utility
CPU Internal Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up NumLock Status
Gate A20 Option
ATA 66/100 IDE Cable Msg
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
APIC Mode
HDD S.M.A.R.T Capability
Video BIOS Shadow
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
CPU Internal Cache (Enabled)
All processors that can be installed in this motherboard use internal level 1 (L1)
cache memory to improve performance. Leave this item at the default value
for better performance.
Advanced BIOS Setup
[Enabled]
[Enabled]
Menu Level
[Floppy]
Allows you to choose
[HDD-0]
the VIRUS warning
[CD-ROM]
feature for IDE Hard
[Enabled]
Disk boot sector
[On]
protection. If this
[Fast]
function is enabled
[Disabled]
and someone attempts
[Disabled]
to write data into this
6
area, BIOS will show a
250
warning message on
[Setup]
screen and alarm beep
[Enabled]
[Disabled]
[Enabled]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
31
Item Help
F1:General Help