ECS kt600-a User Manual page 61

IDE HDD Block Mode (Enabled)
Enable this field if your IDE hard drive supports block mode. Block mode en-
ables BIOS to automatically detect the optimal number of block read and
writes per sector that the drive can support and improves the speed of access
to IDE devices.
Press <Esc> to return to the Integrated Peripherals screen.
OnChip PCI Device
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
AC97 Audio
MC97 Modem
OnChip LAN
OnChip LAN Boot ROM
OnChip USB Controller
USB 2.0 Support
USB Legacy Support
USB Mouse Support
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
AC97 Audio (Auto)
Enables and disables the onboard audio chip. Disable this item if you are go-
ing to install a PCI audio add-in card.
MC97 Modem (Auto)
Enables and disables the onboard modem. Disable this item if you are going
to install an external modem.
OnChip LAN (Enabled)
Enables and disables the onboard LAN.
OnChip LAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the onboard LAN or a
network add-in card with a remote boot ROM installed.
OnChip USB Controller (Enabled)
Enable this item if you plan to use the Universal Serial Bus ports on this main-
board.
USB 2.0 Support (Enabled)
Enable this item if your motherboard supports the USB 2.0 function.
OnChip PCI Device
[Auto]
[Auto]
Menu Level
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
39
Item Help
F1:General Help