Powering Down The M3 Sonar - Kongsberg M3 Sonar Installation Manual

M3 Sonar Installation Manual
Tip
The contents of the
C:\KML\M3_V0220\LOGS.
f If you see missing pings, try reduce the override value (in the
improve the performance.

Powering down the M3 Sonar

The M3 Sonar is not provided with an on/off switch.
Context
When you do not use the M3 Sonar, switch off the entire system.
Procedure
1 If you are running the sonar, click
2 Switch off the Sonar Processor.
a Save your settings, then close the M3 software and any third-party software.
b Shut down Windows.
3 Disconnect the power cord leading to the power supply.
Alternatively, switch off the breaker supplying power to the M3 Sonar.
4 Switch off any additional items, such as a sound velocity profiler or display.
If required, refer to the instructions provided by the product's manufacturer.
74
window are also saved to a file in the folder
Output Messages
→
Setup Disconnect
field) to
Mbps
in the M3 software.
922-20007011/1.3