Master/Slave Mode - Equinox Systems EQLED368 User Manual

Master/slave mode:

To set the master unit, press the "MENU" button and use the "UP" and "DOWN" buttons to select one of
the program modes.
To set the other units in slave mode, press the "MENU" button and use the "UP" and "DOWN" buttons to
SLAV
show on the LED display. Press the "ENTER" button to confirm the setting.
The unit will now run in sequence with the master unit.
To exit out of any of the above options, press the "MENU" button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
IR remote setting:
To access the IR remote setting, press the "MENU" button and use the "UP" and "DOWN" buttons to
InFr
show on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons
on
to choose between
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
ofF
or . Press the "ENTER" button to confirm the setting.
Aztec User Manual
11