Dmx Mode - Equinox Systems EQLED368 User Manual

DMX mode:

Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently.
To access the DMX mode, press the "MENU" button and use the "UP" and "DOWN" buttons to show
Addr
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to
choose one of the 1/7 or 11 DMX channel modes. Press the "ENTER" button to confirm the setting.
The display will now show
"DOWN" buttons to set the required DMX address. Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
1 channel mode:
Channel Value Function
000-009 No function
Auto mode 1 - Par
010-039 LEDs + Tri SMD LEDs
+ White SMD LEDs
Auto mode 2 -
040-069
Par LEDs
Auto mode 3 -
070-099 Tri SMD LEDs +
White SMD LEDs
Auto mode 4 -
100-129
CH1 White SMD LEDs
Sound mode 1 - Par
130-159 LEDs + Tri SMD LEDs
+ White SMD LEDs
Sound mode 2 -
160-189
Par LEDs
Sound mode 3 -
190-219 Tri SMD LEDs +
White SMD LEDs
Sound mode 4 -
220-255
White SMD LEDs
www.prolight.co.uk
Addr
on the LED display. Press the "ENTER" button and use the "UP" and
(slow-fast)
(sensitivity
set in menu)
Operating instructions
Aztec User Manual
6