Speed Setting - Equinox Systems EQLED368 User Manual

Speed setting:

To access the speed setting for auto and sound modes, press the "MENU" button and use the "UP" and
"DOWN" buttons to show
and "DOWN" buttons to select between
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Sound sensitivity:
To access the sound sensitivity setting, press the "MENU" button and use the "UP" and "DOWN" buttons
SEns
to show on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN"
buttons to select the sound sensitivity between
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Colour mix mode:
To access the colour mix mode, press the "MENU" button to show
Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose
Press the "ENTER" button and use the "UP" and "DOWN" buttons to select the brightness of Red
000 255
between ~
g b
repeat for Green,
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Master dimmer:
To access the master dimmer setting for the par LEDs, press the "MENU" button and use the "UP" and
"DOWN" buttons to show
and "DOWN" buttons to select the brightness between
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Please note: this overrides the brightness of par LEDs for static colour, auto, sound
and colour mix modes.
www.prolight.co.uk
SPEE
on the LED display. Now press the "ENTER" button and use the "UP"
SP 1
. Value: 000 - 255 (000 = low, 255 = high). Now press the "ENTER" button and
u
Blue and UV.
dINN
on the LED display. Now press the "ENTER" button and use the "UP"
Operating instructions
SP 9
~ .
SE 1 SE 9
~ .
CoLo
dI 1 dI 9
~
on the LED display.
r001
.
.
Aztec User Manual
10