Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Equinox Systems Butterfly Quad
Summary of Contents for Equinox Systems Butterfly Quad
- Page 1 Butterfly Quad User Manual V2.0 Order code: EQLED100...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk Butterfly Quad User Manual... - Page 3 Product overview & technical specifications Butterfly Quad The Butterfly Quad is a dynamic multi-beam effect featuring two sweeping LED bars, each loaded with four individually controllable narrow beams. Dispensing eight intense and sharp long-throw beams the butterfly cuts through the air with ease. The four button menu system allows control of master/slave functions, and the fixture can be also be operated in sound active and DMX modes. • 8 x 12W quad-colour LEDs • Beam angle: 4.5° • Pixel mapping capabilities • DMX channels: 10 or 36 selectable • Auto, sound active and master/slave modes plus built-in programs • 0 - 100% dimming and variable strobe • Tilt: 180° • Quick release omega clamp included • 4 push button menu with LED display • IEC power input/output • 3-Pin XLR input/output Specifications Power consumption 100W Power supply 100~240V, 50/60Hz Fuse F5A 250V Dimensions 165 x 400 x 220mm Weight 4.75kg Order code EQLED100 400mm 165mm www.prolight.co.uk Butterfly Quad User Manual...
-
Page 4: Technical Specifications
MENU DOWN UP ENTER www.prolight.co.uk POWER IN POWER OUT 01 - Function buttons 06 - Master LED 11 - 3-Pin XLR DMX output In the box: 1 x fixture, 02 - LED display 07 - Fuse F5A 250V 12 - Microphone 1 x omega clamp, 03 - DMX input LED 08 - IEC power input 13 - Earth point 1 x power cable 04 - Power LED 09 - IEC power output & 1 x user manual 05 - Sound LED 10 - 3-Pin XLR DMX input www.prolight.co.uk Butterfly Quad User Manual... -
Page 5: Sound Sensitivity
Tilt 1 inversion y e s 2 t 1 L Tilt 2 inversion t e S t Auto test F h r S Fixture hours u e r Firmware version r S e t Reset www.prolight.co.uk Butterfly Quad User Manual... - Page 6 000-007 No function 197-206 Program 20 008-017 Program 1 207-216 Program 21 018-027 Program 2 217-226 Program 22 028-037 Program 3 227-236 Program 23 038-047 Program 4 237-246 Program 24 048-057 Program 5 247-255 Program 25 058-067 Program 6 CH10 0-255 Program speed (slow-fast) 068-077 Program 7 078-087 Program 8 088-097 Program 9 www.prolight.co.uk Butterfly Quad User Manual...
-
Page 7: Master/Slave Mode
LED 4 Red (0-100% dimming) CH36 000-255 LED 8 White (0-100% dimming) Master/slave mode: SLNd To set the master unit, press the “MENU” button on the front of the master unit to show on the Nast LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose Press the “ENTER” button to confirm the setting. Then select your desired program (sound active, DMX or one of the built-in programs). SLNd To set the other units in slave mode, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose either (Slave 1) or (Slave 2). Press the “ENTER” button to confirm the setting. The unit will now run in sequence with the master unit. To exit out of any of the above options, press the “MENU” button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. Show mode (built-in programs): ShNd To access the show modes, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the Sh 0 Sh24 show you require from . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Butterfly Quad User Manual... - Page 8 Sound active mode: SoUn To access the sound active mode, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the sound mode on or off. Press the “ENTER” button to confirm the setting. Sens To adjust the sound sensitivity, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the sound sensitivity . Press the “ENTER” button to confirm the setting. Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity) To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Butterfly Quad User Manual...
-
Page 9: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Butterfly Quad User Manual... -
Page 10: Line Termination
5-pin XLR (socket) 3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Butterfly Quad User Manual... -
Page 11: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Butterfly Quad User Manual... - Page 12 Butterfly Quad User Manual...