Table of Contents
Advertisement
Pos: 1 /TD/Erste Schritte/testo 330/testo 330i App installieren @ 17\mod_1435042771728_79.docx @ 214027 @ 222255 @ 1
1
Commissioning
1.1.
Installing the App
A mobile terminal device (tablet or smartphone) with the Android or
iOS operating system and Bluetooth® interface is required to
operate the testo 330i / testo 330i LX measuring instrument.
The testo 330i App also needs to be installed on this mobile
device:
1. Open the AppStore on the mobile terminal device.
2. Enter the search term Testo SE to start searching.
3. Select the testo 330i App and install.
Information on the compatibility of the App with your mobile
terminal device can be found in the respective AppStore.
Observe the documentation for your mobile terminal device when
installing the App!
1.2.
Establishing a connection
✓ The testo 330i App must be installed on your mobile terminal
device.
1. Switch on the measuring instrument: Press the
-
Measuring instrument starts up: The blue LED flashes (0.05 s
on / 0.5 s off).
-
Connecting mode is activated: The blue LED flashes (0.5 s on /
0.5 s off).
2. Start up the
-
The
within radio range are displayed (product name + last 4 digits of
the device serial number).
3. Tap instrument designation to select a measuring instrument.
-
It may take around 30 s to establish the connection.
-
A Bluetooth
constant.
-
The first time a connection is established with a measuring
instrument the
testo 330i
Find Device
function is activated: Any compatible devices
®
connection is established: The blue LED is
If it is not possible to establish a connection, various
corrective measures are displayed. If you are unable to
implement these successfully, please refer to the section
Tips and assistance and/or contact your dealer or Testo
Customer Service. For contact details, please visit
www.testo.com/service-contact.
Country version
App on your mobile terminal device.
function opens.
1 Commissioning
key.
3
Advertisement
Table of Contents
