Document ID: 2097944
1. Clean the cylinder head mating surface.
2. Install a new EGR valve gasket.
Caution:
Refer to
3. Install the EGR valve with the retaining bolts.
Tighten
Tighten the EGR valve retaining bolts to 30 N·m (22 lb ft).
4. Connect the EGR valve electrical connector.
5. Connect the negative battery cable.
http://localhost:9001/si/showDoc.do?docSyskey=2097944&pubCellSyskey=124370&pubO...
Fastener Caution
in the Preface section.
Page 2 of 2
7/6/2010